Frame Sliders - Yamaha YZF-R3 2015-18 (Type 2 / 'Street' position)
SATO RACING type 2 (‘Street’ position) Frame Sliders for 2015-18 YZF-R3 (part# Y-R3FS2-BK) feature tough slider pucks made out of high-density black DELRIN, an abrasion-resistant material with low friction properties that make it ideal for protecting the bike from scrapes or more serious damage if you lay it down at speed on the track. The standoff the sliders provide will keep the fairings off the pavement during a slide, with the slider pucks absorbing and dissipating any potential damage while helping the bike slide smoothly to a stop.
These 'Type 2' Sliders use a simpler mounting bracket design than our 'Type1' Frame Sliders, and the slider puck sits a few inches higher up on the frame. Slider is mounted with high strength anodized billet aluminum brackets and collars, and chrome molybdenum bolts. (Use the stock bolts to attach the sliders to the frame). (L/R Set of 2)
‘No Cut’ design - No body modifications are necessary for installation with the OEM fairings.
NOTE: The above photos are of a 2015 Japan-spec YZF-R25.
SATO RACING type 2 (‘Street’ position) Frame Sliders for 2015-18 YZF-R3 (part# Y-R3FS2-BK) feature tough slider pucks made out of high-density black DELRIN, an abrasion-resistant material with low friction properties that make it ideal for protecting the bike from scrapes or more serious damage if you lay it down at speed on the track. The standoff the sliders provide will keep the fairings off the pavement during a slide, with the slider pucks absorbing and dissipating any potential damage while helping the bike slide smoothly to a stop.
These 'Type 2' Sliders use a simpler mounting bracket design than our 'Type1' Frame Sliders, and the slider puck sits a few inches higher up on the frame. Slider is mounted with high strength anodized billet aluminum brackets and collars, and chrome molybdenum bolts. (Use the stock bolts to attach the sliders to the frame). (L/R Set of 2)
‘No Cut’ design - No body modifications are necessary for installation with the OEM fairings.
NOTE: The above photos are of a 2015 Japan-spec YZF-R25.
SATO RACING type 2 (‘Street’ position) Frame Sliders for 2015-18 YZF-R3 (part# Y-R3FS2-BK) feature tough slider pucks made out of high-density black DELRIN, an abrasion-resistant material with low friction properties that make it ideal for protecting the bike from scrapes or more serious damage if you lay it down at speed on the track. The standoff the sliders provide will keep the fairings off the pavement during a slide, with the slider pucks absorbing and dissipating any potential damage while helping the bike slide smoothly to a stop.
These 'Type 2' Sliders use a simpler mounting bracket design than our 'Type1' Frame Sliders, and the slider puck sits a few inches higher up on the frame. Slider is mounted with high strength anodized billet aluminum brackets and collars, and chrome molybdenum bolts. (Use the stock bolts to attach the sliders to the frame). (L/R Set of 2)
‘No Cut’ design - No body modifications are necessary for installation with the OEM fairings.
NOTE: The above photos are of a 2015 Japan-spec YZF-R25.