Timing Hole Plug - Honda (Various)
SATO RACING Timing Hole Plug for Honda part# THP-HS / THP-HM features a tough, abrasion-resistant black DELRIN slider puck in your choice of low profile (THP-HS) or higher profile (THP-HM) versions. Provides effective protection of the R-side engine case and lower bodywork if in a slide at speed on the track. Slider is mounted on a gold-anodized billet aluminum base with pre-drilled holes for attaching a safety wire around the outside perimeter. Easy install.
Part# THP-HS / THP-HM - fits:
CBR1000RR '06-'14
CBR600RR '03-'08 / 2021-24 Japan/EU-spec
CB1000R '08-'16 / '18-’23
CBR650F/ CB650F '14-'18
CBR650R/ CB650R '19-’23
919 / Hornet
THP-HM (which has the higher profile slider puck) is recommended for the following models::
CBR500R/ 400R ('13-'15)/ CB500F/ X (CB400F/ X)
VTR250
VFR1200F
THP-HM is seen in the first 2 photos above, shown installed on a 2019 CBR650R and a CB650R. The rest of the photos show part# THP-HS.
NOTE: Threadlocker such as red Loctite (not included) is recommended for install.
SATO RACING Timing Hole Plug for Honda part# THP-HS / THP-HM features a tough, abrasion-resistant black DELRIN slider puck in your choice of low profile (THP-HS) or higher profile (THP-HM) versions. Provides effective protection of the R-side engine case and lower bodywork if in a slide at speed on the track. Slider is mounted on a gold-anodized billet aluminum base with pre-drilled holes for attaching a safety wire around the outside perimeter. Easy install.
Part# THP-HS / THP-HM - fits:
CBR1000RR '06-'14
CBR600RR '03-'08 / 2021-24 Japan/EU-spec
CB1000R '08-'16 / '18-’23
CBR650F/ CB650F '14-'18
CBR650R/ CB650R '19-’23
919 / Hornet
THP-HM (which has the higher profile slider puck) is recommended for the following models::
CBR500R/ 400R ('13-'15)/ CB500F/ X (CB400F/ X)
VTR250
VFR1200F
THP-HM is seen in the first 2 photos above, shown installed on a 2019 CBR650R and a CB650R. The rest of the photos show part# THP-HS.
NOTE: Threadlocker such as red Loctite (not included) is recommended for install.
SATO RACING Timing Hole Plug for Honda part# THP-HS / THP-HM features a tough, abrasion-resistant black DELRIN slider puck in your choice of low profile (THP-HS) or higher profile (THP-HM) versions. Provides effective protection of the R-side engine case and lower bodywork if in a slide at speed on the track. Slider is mounted on a gold-anodized billet aluminum base with pre-drilled holes for attaching a safety wire around the outside perimeter. Easy install.
Part# THP-HS / THP-HM - fits:
CBR1000RR '06-'14
CBR600RR '03-'08 / 2021-24 Japan/EU-spec
CB1000R '08-'16 / '18-’23
CBR650F/ CB650F '14-'18
CBR650R/ CB650R '19-’23
919 / Hornet
THP-HM (which has the higher profile slider puck) is recommended for the following models::
CBR500R/ 400R ('13-'15)/ CB500F/ X (CB400F/ X)
VTR250
VFR1200F
THP-HM is seen in the first 2 photos above, shown installed on a 2019 CBR650R and a CB650R. The rest of the photos show part# THP-HS.
NOTE: Threadlocker such as red Loctite (not included) is recommended for install.