FRAME SLIDERS - KTM 690 Duke 12-'18
SATO RACING Frame Sliders for 2012-18* KTM 690 Duke (part# KTM-69012FS-BK) feature slider pucks made of tough, abrasion-resistant black DELRIN for maximum protection if you lay it down at speed on the track. Sliders are attached to the frame with high strength anodized billet aluminum brackets and collars, and stainless steel bolts. (L/R Set of 2)
*Compatibility with 2016-18 690 Duke is unconfirmed.
NOTE: These Frame Sliders were designed off of a 2012 690 Duke which came with a front engine mount bolt that was put in from right to left, with the threaded end with the nut on the left side. But, on some '13-'14 690 Dukes, this bolt was apparently factory installed flipped around, with the threaded end of the bolt on the right side, and the head on the left side. If your 690 Duke has this flipped mount bolt, installation of our Frame Sliders will require you to remove this bolt and flip it around so the threaded end is on the left side. Doing this will require unbolting the exhaust manifold, so please check this bolt on your bike before ordering so there aren't any surprises when it comes time to install the sliders.
SATO RACING Frame Sliders for 2012-18* KTM 690 Duke (part# KTM-69012FS-BK) feature slider pucks made of tough, abrasion-resistant black DELRIN for maximum protection if you lay it down at speed on the track. Sliders are attached to the frame with high strength anodized billet aluminum brackets and collars, and stainless steel bolts. (L/R Set of 2)
*Compatibility with 2016-18 690 Duke is unconfirmed.
NOTE: These Frame Sliders were designed off of a 2012 690 Duke which came with a front engine mount bolt that was put in from right to left, with the threaded end with the nut on the left side. But, on some '13-'14 690 Dukes, this bolt was apparently factory installed flipped around, with the threaded end of the bolt on the right side, and the head on the left side. If your 690 Duke has this flipped mount bolt, installation of our Frame Sliders will require you to remove this bolt and flip it around so the threaded end is on the left side. Doing this will require unbolting the exhaust manifold, so please check this bolt on your bike before ordering so there aren't any surprises when it comes time to install the sliders.
SATO RACING Frame Sliders for 2012-18* KTM 690 Duke (part# KTM-69012FS-BK) feature slider pucks made of tough, abrasion-resistant black DELRIN for maximum protection if you lay it down at speed on the track. Sliders are attached to the frame with high strength anodized billet aluminum brackets and collars, and stainless steel bolts. (L/R Set of 2)
*Compatibility with 2016-18 690 Duke is unconfirmed.
NOTE: These Frame Sliders were designed off of a 2012 690 Duke which came with a front engine mount bolt that was put in from right to left, with the threaded end with the nut on the left side. But, on some '13-'14 690 Dukes, this bolt was apparently factory installed flipped around, with the threaded end of the bolt on the right side, and the head on the left side. If your 690 Duke has this flipped mount bolt, installation of our Frame Sliders will require you to remove this bolt and flip it around so the threaded end is on the left side. Doing this will require unbolting the exhaust manifold, so please check this bolt on your bike before ordering so there aren't any surprises when it comes time to install the sliders.