Rear Axle Sliders type2 - Ducati Diavel / Panigale / Monster 1200 + various
SATO RACING 'Type2' Rear Axle Sliders (part# D-1199AS-R) for Ducati models with the larger size hub diameter features slider pucks made of high-density black Delrin, an abrasion-resistant plastic material with low friction properties ideal for protecting the rear wheel, and swingarm area from scrapes or more serious damage if you slide on the track. These premium quality Axle Sliders fit into the rear axle hub and are held in place with a stainless steel through-bolt.
These 'Type 2' Axle Sliders have a groove design that allows the bike to be used with compatible hook-type race stands*. It also features an inner Delrin sleeve on the left side, for compatibility with single-side swingarm-type stands using a smaller 25mm diameter (848-type) pin / shaft.
*Fits V-type hooks with at least 35mm opening and max. 5mm thick.
NOTE: Hook-type bike stand cannot be used with these Axle Sliders in situations when the rear wheel needs to turn, such as during dyno testing.
Fits:
Diavel / Diavel 1260 / Diavel V4 / X-Diavel
Panigale 1199 / 1299 / V4 / V2
Monster 1200 series
1198 / 1098S (later models)
Streetfighter/S (1098-based)
Streetfighter V4 / V2
Supersport ‘17-
(NOT compatible with Ducati 899 / 959 Panigale, 848, Streetfighter 848, or early 1098 models)
SATO RACING 'Type2' Rear Axle Sliders (part# D-1199AS-R) for Ducati models with the larger size hub diameter features slider pucks made of high-density black Delrin, an abrasion-resistant plastic material with low friction properties ideal for protecting the rear wheel, and swingarm area from scrapes or more serious damage if you slide on the track. These premium quality Axle Sliders fit into the rear axle hub and are held in place with a stainless steel through-bolt.
These 'Type 2' Axle Sliders have a groove design that allows the bike to be used with compatible hook-type race stands*. It also features an inner Delrin sleeve on the left side, for compatibility with single-side swingarm-type stands using a smaller 25mm diameter (848-type) pin / shaft.
*Fits V-type hooks with at least 35mm opening and max. 5mm thick.
NOTE: Hook-type bike stand cannot be used with these Axle Sliders in situations when the rear wheel needs to turn, such as during dyno testing.
Fits:
Diavel / Diavel 1260 / Diavel V4 / X-Diavel
Panigale 1199 / 1299 / V4 / V2
Monster 1200 series
1198 / 1098S (later models)
Streetfighter/S (1098-based)
Streetfighter V4 / V2
Supersport ‘17-
(NOT compatible with Ducati 899 / 959 Panigale, 848, Streetfighter 848, or early 1098 models)
SATO RACING 'Type2' Rear Axle Sliders (part# D-1199AS-R) for Ducati models with the larger size hub diameter features slider pucks made of high-density black Delrin, an abrasion-resistant plastic material with low friction properties ideal for protecting the rear wheel, and swingarm area from scrapes or more serious damage if you slide on the track. These premium quality Axle Sliders fit into the rear axle hub and are held in place with a stainless steel through-bolt.
These 'Type 2' Axle Sliders have a groove design that allows the bike to be used with compatible hook-type race stands*. It also features an inner Delrin sleeve on the left side, for compatibility with single-side swingarm-type stands using a smaller 25mm diameter (848-type) pin / shaft.
*Fits V-type hooks with at least 35mm opening and max. 5mm thick.
NOTE: Hook-type bike stand cannot be used with these Axle Sliders in situations when the rear wheel needs to turn, such as during dyno testing.
Fits:
Diavel / Diavel 1260 / Diavel V4 / X-Diavel
Panigale 1199 / 1299 / V4 / V2
Monster 1200 series
1198 / 1098S (later models)
Streetfighter/S (1098-based)
Streetfighter V4 / V2
Supersport ‘17-
(NOT compatible with Ducati 899 / 959 Panigale, 848, Streetfighter 848, or early 1098 models)