Handle Bar Ends - Full-size (35mm) Stainless Steel - + Inner Weights for hollow bars
SATO RACING Full-size Slider-style Stainless Steel HANDLE BAR ENDS + inserts + Inner Weights for hollow bars (part# BE35-2-SUS) are full-size (35mm diameter) Bar Ends CNC-machined out of heavy billet stainless steel, with end caps made of tough, abrasion-resistant black Delrin, to help protect the ends of the bars from damage in case of a crash or fallover. This model includes aluminum expansion sleeve inserts and solid brass inner bar weights that can help suppress handle bar vibration. Fits handle bars with 14-16mm or 18-19mm internal bar diameter (Will not fit handle bars with less than 14mm internal diameter. Requires a bar depth of at least 130mm). (Set of 2)
Compatible with the following models*:
DUCATI (Fits most models. Will not fit Multistrada 1100S)
KTM 125/200 Duke (-'14)/ 690/790 Duke/ 990/1290 SuperDuke** / RC8/R
APRILIA RSV4 '09- / Tuono V4 R '12-'16
EBR 1190RX
Husqvarna Vitpilen 701 ‘19-’20 / Vitpilen 401 / Svartpilen 401 ‘18-’19
Indian FTR 1200**
MV Agusta Brutale 1090/675/800 / F4**
Triumph Daytona 675R
Kawasaki Ninja H2 '15- / Z125 Pro
Suzuki SV650 ABS / GSX-S1000/Katana / Hayabusa -‘20
SATO RACING 'Race Concept' Clip-On Handle Bars
some aftermarket handle bars/ clip-ons (if I.D. is less than 19mm)
*NOTE: The stock internal bar inserts will need to be removed for our bar ends to be installed.
** Some Indian FTR 1200, KTM 1290 and later MV Agusta models are not compatible with the Inner Weights due to having a slightly too narrow internal diameter, amd/or there are interference issues inside the bars, so please check your bars before ordering.
NOTE: the inner weights might not fit inside handle bars that have exactly 14mm internal diameter, since the weights are also exactly 14mm. additionally, the rubber insulators on the weights add another millimeter to the diameter. Removing the insulators should allow the weights to be used with bars closer to 14mm.
SATO RACING Full-size Slider-style Stainless Steel HANDLE BAR ENDS + inserts + Inner Weights for hollow bars (part# BE35-2-SUS) are full-size (35mm diameter) Bar Ends CNC-machined out of heavy billet stainless steel, with end caps made of tough, abrasion-resistant black Delrin, to help protect the ends of the bars from damage in case of a crash or fallover. This model includes aluminum expansion sleeve inserts and solid brass inner bar weights that can help suppress handle bar vibration. Fits handle bars with 14-16mm or 18-19mm internal bar diameter (Will not fit handle bars with less than 14mm internal diameter. Requires a bar depth of at least 130mm). (Set of 2)
Compatible with the following models*:
DUCATI (Fits most models. Will not fit Multistrada 1100S)
KTM 125/200 Duke (-'14)/ 690/790 Duke/ 990/1290 SuperDuke** / RC8/R
APRILIA RSV4 '09- / Tuono V4 R '12-'16
EBR 1190RX
Husqvarna Vitpilen 701 ‘19-’20 / Vitpilen 401 / Svartpilen 401 ‘18-’19
Indian FTR 1200**
MV Agusta Brutale 1090/675/800 / F4**
Triumph Daytona 675R
Kawasaki Ninja H2 '15- / Z125 Pro
Suzuki SV650 ABS / GSX-S1000/Katana / Hayabusa -‘20
SATO RACING 'Race Concept' Clip-On Handle Bars
some aftermarket handle bars/ clip-ons (if I.D. is less than 19mm)
*NOTE: The stock internal bar inserts will need to be removed for our bar ends to be installed.
** Some Indian FTR 1200, KTM 1290 and later MV Agusta models are not compatible with the Inner Weights due to having a slightly too narrow internal diameter, amd/or there are interference issues inside the bars, so please check your bars before ordering.
NOTE: the inner weights might not fit inside handle bars that have exactly 14mm internal diameter, since the weights are also exactly 14mm. additionally, the rubber insulators on the weights add another millimeter to the diameter. Removing the insulators should allow the weights to be used with bars closer to 14mm.
SATO RACING Full-size Slider-style Stainless Steel HANDLE BAR ENDS + inserts + Inner Weights for hollow bars (part# BE35-2-SUS) are full-size (35mm diameter) Bar Ends CNC-machined out of heavy billet stainless steel, with end caps made of tough, abrasion-resistant black Delrin, to help protect the ends of the bars from damage in case of a crash or fallover. This model includes aluminum expansion sleeve inserts and solid brass inner bar weights that can help suppress handle bar vibration. Fits handle bars with 14-16mm or 18-19mm internal bar diameter (Will not fit handle bars with less than 14mm internal diameter. Requires a bar depth of at least 130mm). (Set of 2)
Compatible with the following models*:
DUCATI (Fits most models. Will not fit Multistrada 1100S)
KTM 125/200 Duke (-'14)/ 690/790 Duke/ 990/1290 SuperDuke** / RC8/R
APRILIA RSV4 '09- / Tuono V4 R '12-'16
EBR 1190RX
Husqvarna Vitpilen 701 ‘19-’20 / Vitpilen 401 / Svartpilen 401 ‘18-’19
Indian FTR 1200**
MV Agusta Brutale 1090/675/800 / F4**
Triumph Daytona 675R
Kawasaki Ninja H2 '15- / Z125 Pro
Suzuki SV650 ABS / GSX-S1000/Katana / Hayabusa -‘20
SATO RACING 'Race Concept' Clip-On Handle Bars
some aftermarket handle bars/ clip-ons (if I.D. is less than 19mm)
*NOTE: The stock internal bar inserts will need to be removed for our bar ends to be installed.
** Some Indian FTR 1200, KTM 1290 and later MV Agusta models are not compatible with the Inner Weights due to having a slightly too narrow internal diameter, amd/or there are interference issues inside the bars, so please check your bars before ordering.
NOTE: the inner weights might not fit inside handle bars that have exactly 14mm internal diameter, since the weights are also exactly 14mm. additionally, the rubber insulators on the weights add another millimeter to the diameter. Removing the insulators should allow the weights to be used with bars closer to 14mm.